Do not press the reset button on any WiConnect equipment. A reset erases the settings and a technician will have to come out.
- Check the POE adapter light Find the POE — the smaller white or black box, about 3 inches long, with a power cord on one end. Verify a light is on.
- Reseat the cables Unplug the power cord from the POE. Verify the cable coming from outside is plugged into the port labeled POE, and that the LAN cable running to your router is in the LAN port — the two ports on the box are labeled.
- Power it back up Plug the power cord back into the wall or power strip.
- Wait up to 3 minutes Allow up to three minutes for the radio to communicate with the equipment inside your home before you try connecting your devices.
- Reconnect your devices You may need to restart your PC or laptop. After it restarts, look for your available network and, if asked, enter your Wi-Fi password.
If these steps do not work, please call the office at (608) 524-1579 for further troubleshooting support.
Still down?
Or call (608) 524-1579. If this happens often, tell us — it may be an equipment problem we should fix.
Never bend, unplug or clean the fiber cable itself. The glass is fragile and the connector must stay sealed.
WiConnect